Related Manuals for Swiss Madison SM-STS31
Summary of Contents for Swiss Madison SM-STS31
- Page 1 Aqua Non-Electric Smart Toilet Seat Bidet ® INSTALLATION INSTRUCTIONS ® w e l l m a d e f o r e v e r @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.com...
-
Page 2: Installation Instructions
· · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss Madison products by hiring a licensed professional. · Read installation and maintenance instructions thoroughly before installing. Be sure to use proper tools and always wear proper personal safety accessories for your protection. -
Page 3: Technical Specifications
SMART SEAT BIDET TECHNICAL SPECIFICATIONS SM-STS31 Water Inlet Side Wash Water Flow 0.09 gal/min - 0.48 gal/min Bidet Water Flow 0.09 gal/min - 0.48 gal/min Backflow Prevention Check valve, vacuum breaker Water Supply Direct from water pipes Water Pressure Range Static pressure: 0.07 - 0.8 MPa, Dynamic pressure: above 0.03 MPa... -
Page 4: Pre-Installation
SMART SEAT BIDET INSTALLATION INSTRUCTIONS PRE-INSTALLATION CAUTION: · The water pressure limit is from 0.07 to 0.8 MPa, please use as instructed. · The water shutoff valve should be near where the product can be installed and dismantled. 1. Insert Connecting Bolts 2. - Page 5 SMART SEAT BIDET INSTALLATION INSTRUCTIONS 3. Install Installation Template · Install the installation template on the toilet as shown. 4. Attach the Adaptable Panel Installation A: · Place the fixing plate over the expansion bolts, followed by the adjustment sheets then screws. ·...
- Page 6 SMART SEAT BIDET TECHNICAL SPECIFICATIONS 5. Remove Installation Template & Install Product · Remove installation template. · Keep the fix slots under the product aim at slots on the fixing plate. Push the product to the end as shown below. Then complete installation. fix slots 6.
- Page 7 SMART SEAT BIDET TECHNICAL SPECIFICATIONS 7. Connect Water Pipe to the T-Pipe NOTE: Please remove the regulator cover and regulate o-ring under the following conditions: a. When the water dynamic pressure is lower than 0.05 MPa. b. When the nozzle cannot work normally and water is low. ·...
- Page 8 SMART SEAT BIDET FUNCTIONS WASH · Turn the lever clockwise form the vertical position. · Nozzle for WASH moves forward and will start the function. · The water volume changes with the turning of the lever. Low flow High flow BIDET ·...
-
Page 9: Maintenance
SMART SEAT BIDET MAINTENANCE OUTER CLEANING INSTRUCTIONS: · Use a smooth or cloth with diluted kitchen detergent to clean the product. Do not use the following: hydrogen chloride detergent, paint thinner, benzene, abrasive paper, polishing agent, fragrance or insecticide etc. CLEANING THE NOZZLE: ·... -
Page 10: Nozzle Replacement
SMART SEAT BIDET MAINTENANCE LEVER REPLACEMENT: NOZZLE REPLACEMENT: · As per figure A, rotate the lever to the highest · As per figure A, pull out the tube and do not wash volume. As per figure B, remove the old lever release then remove the old nozzle along the axis along the axis direction. -
Page 11: Troubleshooting
SMART SEAT BIDET TROUBLESHOOTING Status Cause Solution 1. During WASH/BIDET, turn the lever fast to the biggest volume. Water is too 1. Low water pressure of the unit. 2. When water supply pressure is lower than low during 2. Low water pressure of the water supply. WASH/BIDET 0.07 MPa, contact local department for water pressure question. -
Page 12: One-Year Limited Warranty
(including, without limitation, costs associated with ‘professionals’ or ‘experts’, investigations, audits, analyses, attorneys and any other professional/hired services). The Swiss Madison® warranty is a comprehensive and explicit limit of liability. All items not disclosed within the warranty are not addressable within the responsibility of Swiss Madison®. Certain states have variances regarding implied warranties;...
Need help?
Do you have a question about the SM-STS31 and is the answer not in the manual?
Questions and answers