Table of Contents
Advertisement
2. Hardware Installation
Gather all information related to your Internet Connection before you
Note:
start. If necessary, contact your Internet Service Provider (ISP).
1. Verify that you have an Internet connection
when connecting your computer directly to the
Cable or DSL modem. Open your browser
(e.g. Internet Explorer) and type in a URL (e.g.
http://www.trendnet.com) in the address bar.
2. If you plan on connecting a multi-function
printer to the USB port on the TEW-673GRU,
install the printer drivers on your computer.
Then shutdown the printer and disconnect the
printer from your computer.
Note: Please refer to your printer's manual for
printer installation instructions.
3. Connect one end of a RJ-45 cable to the
TEW-673GRU's WAN port. Connect the other
end of the cable to your modem.
5. Connect one end of a RJ-45 cable to one of the
TEW-673GRU's LAN ports. Connect the other
end of the cable to the computer's Ethernet
port.
Internet
2
Cable/DSL Modem
Advertisement
Table of Contents
