Hardware Installation - TRENDnet TEW-652BRP Quick Installation Manual

2. Hardware Installation

Note: Gather all information related to your Internet Connection before you
start. If necessary, contact your Internet Service Provider (ISP).
1. Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem. Open your browser
(e.g. Internet Explorer) and type in
a URL (e.g.
http://www.trendnet.com) in the
address bar.
2. Connect one end of a RJ-45 cable
to one of the TEW-652BRP's LAN
ports. Connect the other end of
the cable to the computer's
Ethernet port.
3. Connect one end of a RJ-45 cable
to the TEW-652BRP's WAN port.
Connect the other end of the cable
to your modem.
4. Connect the AC Power Adapter to
the wireless router and then to a
power outlet.
5. Verify that the following panel lights
are on: Power, LAN and WAN.
Internet
2
English
Cable/DSL Modem