TRENDnet TEW-610APB User Manual page 20

Firmware Upgrade
Note: Firmware upgrade cannot be performed from a wireless device. To perform an upgrade,
ensure that you are using a PC that is connected to the AP by wire.
Note: Some firmware upgrades reset the AP's configuration options to the factory defaults.
Upload
Once you have a firmware update on your computer, use this option to browse for the file and
then upload the information into the AP.
Device name
This is the name that the device will use to identify itself.
IP Address Mode
Select "DHCP" to get the IP settings from a DHCP server on your network. Select "Static" to
use the IP settings specified on this section.
Default IP address
When configure as Static IP address mode, it defines the IP address of your device.
Default subnet mask
When configure as Static IP address mode, it defines the subnet mask specifies the network
number portion of an IP address.
Default gateway
When configure as Static IP address mode, it defines the IP address of the gateway that
connects you to the internet.
Security
User name
This is the user name that you must type when logging in to these web pages.
Administrator password
This is the password that you must type when logging in to these web pages. You must enter
same password into both boxes, for confirmation.
20