TRENDnet TEW-610APB User Manual page 14

108mbps 802.11g mimo wireless access point
Hide thumbs Also See for TEW-610APB:
Table of Contents

Advertisement

Visibility Status
The Invisible option allows you to hide your wireless network. When this option is set to Visible,
your wireless network name is broadcast to anyone within the range of your signal. If you're not
using encryption then they could connect to your network. When Invisible mode is enabled,
you must enter the Wireless Network Name (SSID) on the client manually to connect to the
network.
Transmission Rate
By default the fastest possible transmission rate will be selected. You have the option of
selecting the speed if necessary.
802.11 Mode
If all of your devices can connect in 802.11g Mode, you can change the mode to 802.11g only.
If you have some devices that are 802.11b, leave the setting at Mixed.
Adaptive Radio Selection
Check this box to enable Adaptive Radio feature in Dynamic Turbo mode.
Super Mode
Super G Turbo Modes must use channel 6 for communication. For Super G with Static Turbo,
802.11 Mode must be set to 802.11g.
Super G without Turbo: Performance enhancing features such as Packet Bursting,
FastFrames, and Compression.
Super G with Static Turbo: This mode is not backwards compatible with non-Turbo (legacy)
devices. This mode should only be enabled when all devices on the wireless network are Static
Turbo enabled.
Super G with Dynamic Turbo: This mode is backwards compatible with non-Turbo (legacy)
devices. This mode should be enabled when some devices on the wireless network are not
Turbo enabled but support other Super G features mentioned above.
Auto Channel Select
If you select this option, the AP automatically finds the channel with least interference and uses
that channel for wireless networking. If you disable this option, the AP uses the channel that
you specify with the following Channel option.
Channel
A wireless network uses specific channels in the 2.4GHz wireless spectrum to handle
communication between clients. Some channels in your area may have interference from other
electronic devices. Choose the clearest channel to help optimize the performance and
coverage of your wireless network.
14

Advertisement

Table of Contents
loading

Table of Contents