TRENDnet TEW-455APBO Specifications page 2

9dBi High Power Wireless Outdoor PoE Access Point
TEW-455APBO
SPECIFICATIONS
Hardware
Standards
LED Indicator
Antenna
PoE
EXT (50ohm)
Dimension (L x W x H)
Weight
Power Consumption
Management
Wind Speed Support
Waterproof
Temperature
Humidity
Power
Certification
Wireless
Frequency
Module Technique
Media Access Protocol
Data Rate (auto-fallback)
Security
Output Power
Receiving Sensitivity
Channels
• Wired: IEEE 802.3 (10Base-T), and IEEE 802.3u (100Base-TX)
• Wireless: IEEE 802.11g
• Power, WLAN (Wireless activity)
• Built-in 9dBi Patch Antenna, Polarization, V45° H45°
• RJ-45 Connector for Data & PoE Support
• N-Type Female connector (TEW-ASAL1 is required for use with TRENDnet high gain antennas)
• 250 x 260 x 80 mm (9.8 x 10 x 3.1 inches)
• 1.6kg (3.5 lbs)
• 7 Watts (Max.)
• Web browser (Http), SNMP, Telnet
• 120km/h
• IP66 Compliant
• 30 ~ 65 C (-22 F~ 149 F) ° ° ° °
• Max. 95% (Non-Condensing)
• PoE Injector & Power Cord Included
• CE, FCC
• 2.400 to 2.4835GHz (Industrial Scientific Medical Band)
• 802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps) • 802.11g: OFDM, 16/64-QAM
• CSMA/CA with ACK
• 802.11b: 11Mbps, 5Mbps, 2Mbps and 1Mbps • 802.11g: 108Mbps, 54Mbps, 48Mbps, 36Mbps, 24Mbps, 12Mbps and 6Mbps
• 64/128/152-bit WEP (HEX/ASCII), WPA-PSK (AES/TKIP) for AP/Bridge, WPA (AES / TKIP) for AP only
• Enable/Disable SSID Broadcast, MAC Address Filtering, VPN Pass-Through
• 19dBm±1max. (Adjustable)
• 802.11b: -87dBm (typical) @ 11mpbs
• 802.11g: -73dBm (typical) @ 54Mbps
• 1~11 channel (US), 1~13 channel (EU)
TEW-455APBO
rev:08.24.2009