Trap Configuration - TRENDnet TEG-S811FI User Manual

Trap Configuration

A trap manager is a management station that receives traps, the system alerts generated
by the switch. If no trap manager is defined, no traps will issue. Create a trap manager by
entering the IP address of the station and a community string. To define management
stations as trap manager and enter SNMP community strings and selects the SNMP
version.
1. IP Address: enter the IP address of trap manager.
2. Community: enter the community string.
3. Trap Version: select the SNMP trap version type – v1 or v2.
4. Click .
Add
5. To remove the community string, select the community string that you have defined
and click Remove
SNMP System Configuration interface
. You cannot remove the default community string set.
76