Snmp Commands Set - TRENDnet TEG-S811FI User Manual

static
show mac-address-table
filter
no mac-address-table
static hwaddr
[MAC]
no mac-address-table
filter hwaddr
[MAC]
no mac-address-table

SNMP Commands Set

Trendnet Commands
snmp system-name
[System Name]
snmp system-location
[System Location]
snmp system-contact
[System Contact]
snmp agent-mode
[v1v2c|v3|v1v2cv3]
snmp
community-strings
[Community]
right
[RO/RW]
snmp-server host
[IP address]
address table
P Show filter MAC
address table.
I Remove an entry of
MAC address table of
interface (static)
G Remove an entry of
MAC address table
(filter)
G Remove dynamic entry
of MAC address table
Level Description
G Set SNMP agent
system name
Set SNMP agent
G
system location
G Set SNMP agent
system contact
G Select the agent mode
of SNMP
G Add SNMP community
string.
G Configure SNMP
server host information
31
static
switch#show mac-address-table
filter
switch(config)#interface
fastEthernet 2
switch(config-if)#no
mac-address-table static hwaddr
000012345678
switch(config)#no
mac-address-table filter hwaddr
000012348678
switch(config)#no
mac-address-table
Example
switch(config)#snmp
system-name l2switch
switch(config)#snmp
system-location lab
switch(config)#snmp
system-contact where
switch(config)#snmp agent-mode
v1v2cv3
switch(config)#snmp
community-strings public right
rw
switch(config)#snmp-server host
192.168.1.50 community public