Connecting The Power Cord; Once Connections Are Completed; Turning The Power On; Turning The Power Off - Denon AVR-990 Owner's Manual

ENGLISH

Connecting the Power Cord

Wait until all connections have been completed before connecting the
power cord.
Connection to the AC outlet
• These outlets supply power to external audio
equipment.
• Audio equipment
consumption of 120 W (1 A) can be
connected.
• The power supply turns on and off together
<ON/STANDBY>
with
power is supplied from the outlet. When set
to "STANDBY", no power is supplied.
Power cord
(included)
NOTE
• Insert the AC plugs securely. Incomplete connections could cause
noise.
• Only use the AC outlets to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
with a total power
. When set to "ON",
<ON/STANDBY>
To household power
outlet
[ON/SOURCE]
(AC 120 V, 60 Hz)
[OFF]
QUICK SELECT
[INPUT
SOURCE
SELECT]
MENU
BUTTON
<BUTTON>
[BUTTON]
MENU
<POWER> QUICK SELECT
[MAIN OFF]
[MAIN ON]
[INPUT
SOURCE
SELECT]
Front Rear
Once Connections are
Completed

Turning the Power On

1
Press <POWER> .
The power indicator lights red and the power is set to the
standby mode.
2
Press [ON/SOURCE] or <ON/STANDBY>
The power indicator flashes green and the power turns on.
[INPUT SOURCE SELECT]
b Also press or
standby mode, the power turns on.
[INPUT SOURCE SELECT]
When has been pressed, the input
[INPUT SOURCE SELECT]
source set with the
SELECT
has been pressed, the input source stored in the memory
for the quick select function is set (vpage 78 "Saving Frequently
Used Settings (Quick Select Function)").

Turning the Power Off

1
Press [OFF] or <ON/STANDBY> .
The power is set to the standby mode.
2
Press <POWER> .
The power indicator turns off, and so does the power.
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
the power, or unplug the power cord from the power outlet.
• When using ZONE2, it is possible to turn the power for the MAIN
[MAIN ON]
ZONE only on or off by pressing
.
QUICK SELECT
when in
QUICK
is set. If a
<POWER>
to turn off
[MAIN OFF]
or .