Denon AVR-990 Owner's Manual page 91

Operating Components
CD Player
Front
DEVICE SELECT
POWER OFF
ON/SOURCE Power on or Power on / Standby
1
2
3
SKIP +
6 7
(fast-reverse / fast-forward)
8 9
Rear
0 ~ 9, +10 Number input / Track selection
Default setting
Front
(Preset code)
Special Remarks
Rear
GSpecial RemarksH
q Only one device can be set in the preset memory for each mode.
When a new preset code is registered, the existing code is auto-
matically erased.
Assigning buttons that are Not
Used to Operate Other Devices
(Punch Through Function)
The Blu-ray disc Player/DVD player, Digital Video recorder, video deck,
or CD player can be operated as described below even when
SELECT 2]
is set to the "SAT/CBL " or "TV" position.
• Play (1)
• fast-forward (7)
Power off
• Auto Search (8, 9)
Play
Stop
Front
Pause
Disc skip +
Manual search
[1], [2]
Auto search (cue)
[3]
[6], [7]
[8], [9]
DENON
(111)
q
[DEVICE
SELECT 1]
[DEVICE
SELECT 2]
[DEVICE
• Stop (2) • Pause (3)
• fast-reverse (6)
Rear
[0, 1 ~ 4]
[DYNAMIC
VOLUME]
[BAND]
1
[DEVICE SELECT 1]
Switch .
MAIN/TV : Assigning TV buttons to operate other devices
DEVICE : Assigning satellite receiver or cable TV buttons to
operate other devices
2
[DEVICE SELECT 2]
Switch .
: Assigning TV buttons to operate other devices
TV
SAT/CBL : Assigning satellite receiver or cable TV buttons to
operate other devices
3
[BAND] [DYNAMIC VOLUME]
Press and
time.
The indicator starts flashing.
4
Refer to the table below and input the number
corresponding to the device to be assigned.
Device to be assigned
iPod, HD Radio, SIRIUS, NET/USB
CD Player
Blu-ray disc Player / DVD Player
Digital Video Recorder, Video Deck
No setting
This is set to "No setting" upon purchase.
ENGLISH
at the same
Numbers
[1]
[2]
[3]
[4]
[0]