Page 1
Digital Convection Heater with remote control & Wi-Fi INSTRUCTION MANUAL Model No.: R-088 This product is only suitable for well insulated spaces or occasional use. PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
SAFEGUARDS IMPORTANT When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before using the appliance. To avoid fire or shock hazard, plug the appliance directly into a 220-240V AC electrical outlet.
Page 3
Use appliance only for intended household use only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by the manufacturer cause hazards.
SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Ningbo Baslly Electrical Appliance Co., Ltd, declares that the radio equipment type of R-088 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.rohnson.eu...
REMOTE CONTROL AND GENERAL OPERATION ON/OFF Button Low Heat Output (1000W) / High Heat Output (2000W) / Auto mode / Frost Protection mode Decrease the Temperature and Timer setting Increase the Temperature and Timer setting Timer DIGITAL SCREEN AND GENERAL OPERATION Symbol: Function: 1.
BATTERY PRECAUTIONS Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3.
Page 7
2. Power setting: 2.1 Press the ON/OFF button , the heater goes into "Auto Mode" for heating and icon lights on. Note: Under "Auto Mode", the default setting temperature is 25°C, the heater will start heating or stop automatically. You cannot set your desired temperature. 2.2.
5. Child Lock “+” “-“ Press the button simultaneously for 5 seconds to activate the child lock function for ON or OFF. The symbol " " will light up or go out on the LED display. Settings can be adjusted again after turning off the child lock function. Note: This function can only be set from the heater, and not by remote control.
APP Store for IOS mobile device Connection by WIFI 1.Use your phone to scan the QR code above or search “Rohnson” App in Play store or App store. Download and install the Rohnson App. 2.Select Register. Then, select your country, enter email and tap “Continue” to get a message containing verification on code.
Page 11
The product will be added successfully. In case you see this message, please check the three possible reasons and retry.
Page 12
2000W 1000W Now, the unit is off. Press the on/off “Switch” to turn the unit on. Then, the unit is on. You can adjust your desired temperature from 5-45°C. Once you turn on the heater, it goes into AUTO mode and the default setting temperature is 25°C. Select Mode to set your desired heating mode.
Page 13
Select Settings to turn on/off the child lock, to set timer function (1-24h) or your own schedule (weekly program – specific day and time). Then, press “Save” button in top right corner to save the setting. Select “Fan” to turn on/off the fan function.
Page 14
You can change your product’s name, check device info or share your device with other people. Choose device sharing, add sharing, share with the Account Rohnson or other options. You can share the product with maximum 20 people.
Page 15
Information requirements for electric local space heaters Model number: R-088 Item Symbo Value Unit Item Symbo Value Unit Heat Output Type of heat input, for electric storage local space heaters only (select one) Nominal 1,8- Manual heat charge heat control, with...
Need help?
Do you have a question about the R-088 and is the answer not in the manual?
Questions and answers