Rohnson Quartz R-8021 User Manual
  1. Manuals
  2. Brands
  3. Rohnson Manuals
  4. Heater
  5. Quartz R-8021
  6. User manual

Rohnson Quartz R-8021 User Manual

Hide thumbs

Advertisement

Table of Contents

Quartz R-8021
User Manual
This product is only suitable for well insulated spaces
or occasional use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Quartz R-8021 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rohnson Quartz R-8021

Summary of Contents for Rohnson Quartz R-8021

  • Page 1 Quartz R-8021 User Manual This product is only suitable for well insulated spaces or occasional use...

  • Page 2: Operation

    DESCRIPTION Voltage: 220-240V Frequency:50/60Hz Two heating power: 1100W/2200W Quartz heating element With thermostat protection Tip-over switch protection ASSEMBLY 1. Carefully turn the appliance upside down to fit the castors. 2. Slide the wheel plate at the right position. 3. Secure the wheel plate by lightening the butterfly nut. 4.
  • Page 3 will starts working with 2200W, all heating indicator “ ”light up. 2.4. Power off: Press “ON/OFF” again to shut down the heater. The devise will enter to standby mode. (Except when the heater enters to “open window” mode). 2.5. Mode switch: press “mode”, user can free switch any mode in below 4 modes.
  • Page 4 detects the ambient temperature continuous decline 5℃ within 300 seconds, two tubes on heater will go out and other two tubes will keep light up, the open window indication“ ”lights up. Open window indication can be closed by pressing any button, then the heater resume heating with full power (four tubes all light up).
  • Page 5 (2) Press “+”and “-” to adjust freely the temperature from 15℃ to 32℃. Wait 5 seconds or press directly “SETTING” to confirm the temperature. The heater will start working and heating. Note: when the set temperature is higher than ambient temperature the heater will start working with full power (four tubes all light up).
  • Page 6 3.4. Power saving mode In power saving mode, you can set weekly timing and temperature according to your own needs. (1)Press “MODE” to enter power saving mode, the power saving indication“ ”light up. (2) Press “+”and “-” to adjust freely the temperature from 15℃ to 32℃.
  • Page 7 set minute by press“-”(60 minutes an hour, every adjustment increase one minute and repeat this cycle), then press “SETTING” again to confirm the stopped time that you set. Besides, the heater re-enter timing setting condition to set next timing. (2-4) If you need timing in other day, user can completely re-operates (2-1)(can press “+”and“-”to set date),(2-2),(2-3),(2-4).

  • Page 8: Fault Protection

    every pressing every pressing The time light Set stopped increase one increase one Fifth flicker, “OFF”light time hour and minute and repeat this repeat this cycle cycle If user need timing in other day, user can completely re-operates “third”(can press “+”and“-”to set date), “fourth”, “Fifth”.

  • Page 9: Safety Regulations

    USING RECOMMENDATION • To protect the power switch of the heater, before turning off the heater, please make the heater shutdown first. After the heater stops heating, then turn off power switch. Do not directly turn off power switch and unplug the power plug before making the heater shut down.
  • Page 10 -Do not use the heater if the power cord is damaged. If the power cord is damaged it must be replaced by a recognized service agent or other qualified person. -This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards...
  • Page 11 SAFEGUARD AND MAINTAIN 1. Please pull out the plug and cool it to the normal temperature before safeguarding and maintaining. 2. It’s easy to accumulate of dust on the appearance, should clean it frequently with soft cloth. Must pull down the screws and nut, take off the net cover before cleaning the inner surface of the radiation cover.
  • Page 12 Information requirements for electric local space heaters Model identifier : R-8021 Item Symbol Value unit Item unit Heat output Type of heat input, for electric storage local space heaters only (select one) Nominal heat output P nom manual heat charge control, with [no] integrated thermostat [no]...

Table of Contents