Eq Preset; Zone2 Setup; Level Lch; Level Rch - Denon AVR-1909 Owner's Manual

g EQ Preset
Set MultEQ related settings and Manual EQ beforehand.
EQ Customize
®
When MultEQ and Manual EQ you are not using are preset, MultiEQ
can be skipped when selected on the main unit or main remote control
unit.
n Before running Auto Setup
[Selectable items]
Used Not Used
Manual :
n
After running Auto Setup
[Selectable items]
Used Not Used
Audyssey Byp. L/R :
Used Not Used
Audyssey Flat :
Used Not Used
Manual :
Direct Mode
Select "MultEQ" use for DIRECT or PURE DIRECT mode.
[Selectable items]
ON
: Use "MultEQ".
OFF
: Do not use "MultEQ".
Manual EQ
Adjust tonal quality for each speaker using graphic equalizer.
n Default
Resets the settings to the default values.
n Base Curve Copy
Copy the MultEQ "Audyssey Flat" correction curve.
[Selectable items]
Yes No
"Base Curve Copy" is displayed after the auto setup procedure has
been performed.
n Adjust CH
q S elect speaker adjustment method.
[Selectable items]
Each CH
: Adjust tonal quality for each speaker separately.
L/R CH
: Adjust tonal quality for each L/R speaker pair.
All CH
: Adjust tonal quality for all speakers together.
w S elect the speaker and frequency band and adjust the level.
[Selectable items] 63Hz 125Hz 250Hz
2kHz 4kHz 8kHz
–20dB ~ 0dB
[Variable range]
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 22).

ZONE2 Setup

Make settings for audio playback in a ZONE2 system.
F Menu screen F
2.Manual Setup
1.Speaker Setup
2.HDMI Setup
3.Audio Setup
4.ZONE2 Setup
5.Option Setup
NOTE
"ZONE2 Setup" is displayed when ZONE2 is selected with "Amp
Assign" (vpage 35).
a Level Lch
Adjust the left channel output level.
[Variable range] –12dB ~
500Hz 1kHz
16kHz
s Level Rch
Adjust the right channel output level.
~ +6dB
[Variable range] –12dB ~
ENGLISH ENGLISH
2-4.ZONE2 Setup

Level Lch

: 0dB
Rch : 0dB
Vol.Limit : OFF
Power On Lev.: Last
Mute Lev. : Full
~ +12dB
0dB
~ +12dB
0dB