Externally Accessible Drive Assemblies; Figure 4-9. 3.5-Inch Diskette Drive Removal - Dell Precision 400 Service Manual
Dell precision 400: service manual
Hide thumbs
Also See for Precision 400:
- Owner's manual (214 pages) ,
- User manual (170 pages) ,
- Documentation update (4 pages)
Table of Contents
Advertisement
4-10
Dell WorkStation 400 Systems Service Manual
Externally Accessible Drive Assemblies
bracket-mounting screw
drive-mounting
screws (2)
Figure 4-9. 3.5-Inch Diskette Drive Removal
To remove the 3.5-inch diskette drive, follow these steps:
1. Disconnect the DC power cable and the interface cable from the back of
the 3.5-inch diskette drive.
2. Remove the bracket-mounting screw.
3. Rotate the left side of the 3.5-inch diskette drive assembly up, and lift
the assembly out of the chassis.
4. Remove the two drive-mounting screws from the left side of the drive,
and remove the drive from the bracket.
When you replace the 3.5-inch diskette drive, be sure the two hooks on the right
side of the bracket engage the mounting holes in the side of the 3.5-inch diskette
drive.
hooks (2)
Advertisement
Table of Contents
