DIMMs
DIMM
securing clips (2)
Figure 5-24. DIMM Removal
To remove a DIMM, follow these steps:
1. Unlatch and rotate the power supply up until it locks (see Figure 5-18).
2. Push outward on the DIMM socket's securing clips until the DIMM is
released from its socket.
3. Lift the DIMM away from the socket.
DIMM
2.
securing clips (2)
1.
Figure 5-25. DIMM Installation
To replace a DIMM, press the DIMM fully into the socket (see step 1 of
Figure 5-25) while closing the securing clips to lock the DIMM into the socket
(see step 2 of Figure 5-25).
Removing and Replacing Parts in the Mini Tower Chassis
5-25