Dimms; Video Memory; Figure 4-16. Dimm Removal; Figure 4-17. Dimm Installation - Dell OptiPlex GXa Service Manual

Dell OptiPlex GXa Systems Service Manual
4-18

DIMMs

To remove a DIMM from one of the three DIMM sockets, follow these steps:
1. Remove the system power supply.
2. Locate the three DIMM sockets (see Figure 4-15).
3. To remove a DIMM, push outward on the DIMM socket's securing
clips until the DIMM is released from its socket.
4. Lift the DIMM away from the socket.
securing clips

Figure 4-16. DIMM Removal

5. Reinstall the replacement DIMM by pressing the DIMM fully into the
socket while closing the securing clips to lock the DIMM into the socket.
securing clips

Figure 4-17. DIMM Installation

6. Replace all assemblies and cables previously removed.

Video Memory

You can upgrade video memory from 2 to 4 MB by installing a video-memory
upgrade module into the video-memory upgrade socket on the system board.
Adding additional video memory increases the system's video performance and
provides additional modes for high-resolution/expanded color applications.
2.
1.
2.
1.