Qsan XCubeFAS Quick Installation Manual

1 BEFORE YOU BEGIN
Package Contents
A QSAN storage system includes:
System Chassis (x1)
AC Power Cords (x2) RS-232 Console Cable
(x2) for dual controller model
(x1) for single controller model
2 INSTALL THE DISK DRIVES
Unlock the Disk Drive Tray
- The standard position of the disk drive tray is locked to prevent
damage during transport.
- To unlock disk drive tray: shift the release button lock
from left to right.
Open the Carrier Handle of a Disk Drive Tray
- Open a disk drive tray carrier handle: shift the carrier
handle release button from up to down; then carrier handle will
automatically pop out.
Install a Disk Drive into a Tray
1. Place a disk drive tray onto a stable surface.
2. Remove the supporting bracket. Then align the disk drive with the
connector facing away from the carrier handle.
3. Align the four disk drive tray screw holes on both sides of the
disk tray.
4. Install and tighten all four screws to secure disk drive within the
tray.
XCubeFAS Quick Installation Guide
Thank you for purchasing QSAN storage system.
Disk Drive Trays
(x26 SFF ) for 2U 26-bay
1
Screws Pack for Disk Drives
Optional Accessories
Slide Rail Kit (x1)
You can check the optional accessories on QSAN
website : https://www.qsan.com
Prepare System Information for Installation
- System name
- Admin password
- NTP server address
- Management IP address at controller 1
- DNS server address
More Information
For additional hardware manual, software manual, or
compatibility matrix which includes HDD, SSD, HBA, and
switch requirements, please refer to the QSAN download
center.
Gbic
(x4) for dual con model
SFF : Small Form Factor / 2.5" disk drive
1
(x2) for single con model
XCubeFAS series only supports QSAN SSD
Unlock
Direction
Carrier Handle
Release Button
Release Direction
Unlock Direction
Supporting Bracket
(* Remove for
Disk Insertion)
SFF Tray