DSM-G600 User's Manual
Wireless Network Storage Enclosure
CD-ROM with Manual
Ethernet (CAT5 UTP/Straight-Through) Cable
Thumb Screw (1)
Machine Screws (2)
12V DC 3A Power Adapter
Note: Using a power supply with a different voltage than the one included with the
DSM-G600 will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
Minimum System Requirements
Computer with Windows
Internet Explorer 6.0 or Netscape
An 802.11g/b wireless network
USB Hard Drive and/or Internal 3.5" ATA/IDE Hard Drive
An available Ethernet port on the network*
It is required that an Ethernet cable is used during initial setup. Once your wireless conﬁguration is set,
you may disconnect the Ethernet cable and begin communicating wirelessly with your DSM-G600.
D-Link Systems, Inc.
XP or 2000
Navigator 7.0 and above