D-Link DSM-G600 Manual page 11

DSM-G600 User's Manual
G. Connect the antenna to the antenna
connector located on the back of the
DSM-G600.
H. Connect the power adapter to the
connector on the back panel of the
DSM-G600. Then plug the other
end of the power adapter into a wall
outlet or power strip. After pressing
the Power button, the Power LED
will come on to indicate proper
operation.
Note: When you first power on, the DSM-G600 will automatically format your hard
drive if it is unformatted. This process may take several minutes depending on the size
of your hard drive. During this process, the power LED will blink. Once the power LED
is solid, you may then access the web-based configuration of the DSM-G600. Do not
power the unit off during this process.
D-Link Systems, Inc.
Hardware Installation
11