D-Link DSM-G600 Manual page 10

DSM-G600 User's Manual
D. Use the mounting screw to secure
the hard drive to the DSM-G600.
E. Replace the cover and screw the
two screws on the back panel of the
DSM-G600.
F. Connect an Ethernet cable to the
Ethernet jack located on the back of
the DSM-G600 for initial setup.
Note:
configuration is set, you may disconnect the Ethernet cable and begin communicating wirelessly
with your DSM-G600.
D-Link Systems, Inc.
It is required that an Ethernet cable is used during initial setup. Once your wireless
Hardware Installation
10