D-Link DVG-G1402S Install Manual page 9

DVG-G1402S Install Guide
Configuration (continued)
Select a channel. For best results,
use 1, 6, or 11. Enter the SSID, or
Service Set Identifier, which is the
workgroup name of your Wireless
Network. All devices must all have
the same SSID to communicate
on the wireless network. The SSID
can be up to 32 characters and is
case-sensitive.
Click Next.
Select the Authentication Type:
None, WEP, or WPA-PSK.
Click Next.
If you selected WEP, enter the
EncryptionType (Hex or ASCII),
the encryption level (64, 128, or
152-bit), and the WEP key.
Click Next.
D-Link Systems, Inc.
Configuration
9