Warning:This module connects to the 10-pin plug at the Cd changer location. Cd changer remains connected and functional. If changer malfunctions in any Fig. 2 way, the BTA-GM2 will not function. Please verify changer operation prior to ordering. 3. Connect installation harness 10-pin plug (See Fig. 2) to CD changer slot...
Page 3
Fig. 3 Fig, 5 Fig. 4 10-pin socket/10-pin plug 4. Connect/splice/tap installation harness red wire (See Fig. 5) to 12V ACC (switched) supply in vehicle. Switched (accessory) supply is possible when Fig. 6 the ignition key is set to ACC position and beyond. Avoid connecting red wire to battery supply (always on).
Page 4
Optional USB extension cable installation Notes: If installing module in trunk/hatch, we recommend optional USB extension cable which is not required for operation; however, it extends USB charging port (See Fig. 8) into the cabin. The USB port supports software updates and charging only Drill a ¾”...
Pairing Bluetooth operation Pairing process varies among devices but the process is the same. These steps are Turn ignition and radio “ON” done upon initial install and will not have to be repeated. A good operating range on 2. Press “AUX” or “SOURCE” button on AM/FM radio this device is approximately 12 ft.
BTA-GM2 BTH-GM2 ordering. Retains changer playback The 6-disc changer does not work, will I be able to use the BTA-GM2 or is Requires working CD changer there another solution for music streaming? Audio input jack (Aux in) If vehicle does not have a functioning remote CD changer, purchase our...
Need help?
Do you have a question about the BTA-GM2 and is the answer not in the manual?
Questions and answers