Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Discount Car Stereo Manuals
  4. Automobile Accessories
  5. BTA-BKRCD
  6. Quick start installation manual

Discount Car Stereo BTA-BKRCD Quick Start Installation Manual

For becker with analog cd changers
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
Created: August 16, 2024
Revised: September 26, 2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the BTA-BKRCD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Discount Car Stereo BTA-BKRCD

Summary of Contents for Discount Car Stereo BTA-BKRCD

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 Created: August 16, 2024 Revised: September 26, 2024...

  • Page 2: Installation

    Fig. 2 streaming from smartphone, tablet, kindle etc. CD changer retention and USB charging (5V/2A). Keep in mind for the BTA-BKRCD to work; vehicle must have a 2. Slide tools into slots (51) on radio. (Straight edge facing away). Becker radio and a CD changer such as the CDC-3 (BE2660), BE7860 etc.
  • Page 3 Warning: Chamber C-1 is reserved for vehicles amplifier. YELLOW plug (if present), remains connected. 4. Connect BLUE plug from installation harness (See Fig. 4) into chamber C-3 vacated in step 3 Fig. 5 7. Connect factory 8-pin BLACK plug to power harness matting 8-pin connector (See Fig.
  • Page 4 Fig. 7 Fig, 10 16-pin plug Fig. 8 Fig. 9 Fig. 11 16-pin socket BMW traffic pro with solid 20-pin ISO plug requires our PXHAD3 adapter harness (sold separately) 10. Connect installation harness 16-pin plug (See Fig. 10) to module 16-pin socket (See Fig.
  • Page 5 Optional USB extension cable installation Note: 1. Optional USB dash mount extension cable is not required for operation, however it extends USB charging port (See Fig. 9) to dashboard, glovebox etc. The USB port supports charging only Drill a ¾” hole to dash or panel using a step drill bit or equivalent (See Fig.12) Fig.

  • Page 6: Operation

    Pairing Operation Pairing process varies among devices but the basic steps are the same. This Turn ignition and radio “ON” process is done upon initial install and will not have to be repeated. 2. Press “CD” button on radio or button combination to enter CD changer Turn Ignition and radio “ON”...
  • Page 7 Frequent ask questions & Troubleshooting you must continue to use device built-in controls and display. 5. Can I pair or save more than one device to the BtA-BKRCD? My 1999 Mercedes Benz has an Alpine radio and CD changer. Will I be YES;...