Vpn Passthrough; Log Email Settings - D-Link DI-634M Manual

DI-634M User's Manual
Tools > Misc (continued)
VPN Pass Through:
WAN Select to
10/100Mbps:

Log Email Settings:

From Email
Address:
To Email Address:
SMTP Server:
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
D-Link Systems, Inc.
The DI-634M supports VPN (Virtual Private Network)
pass-through for both PPTP (Point-to-Point Tunneling Protocol)
and IPSec (IP Security). Once VPN pass-through is enabled,
there is no need to open up virtual services. Multiple VPN
connections can be made through the DI-634M. This is useful
when you have many VPN clients on the LAN network.
Normally, this is set to "auto". If you have trouble connecting to
the WAN, try the other settings.
The Email feature can be used to send the system log files to
a designated email address.
This email address will appear as the sender when you receive
a log file via email.
Enter the email address where you want the email sent.
Enter the SMTP server address for sending email.
If your SMTP server requires authentication, select this
Enable
option.
Enter your account for sending email.
Enter the password associated with the account.
Select this option if you want logs to be sent by email when
the log is full.
Select this option if you want logs to be sent by email according
to a schedule.
If you selected the On Schedule option, select one of the
defined schedule rules. If you do not see the schedule you
need in the list of schedules, go to the Advanced -> Schedules
screen and create a new schedule.
Note: Email is sent at the start time defined for a schedule; the
schedule end time is not used for email.
Using the Configuration Menu
52