D-Link DI-634M Manual page 75

DI-634M User's Manual
The Secondary DNS is not needed or enter a DNS server from your ISP.

Click OK twice. You may be asked if you want to reboot your computer.

Click Yes.
How can I assign a Static IP Address in Windows XP?
Click on Start > Control Panel > Network and Internet Connections > Network

connections.
 See the second step for assigning a static IP address in Windows 2000 and
continue from there.
Step 5: Access the Web management. Open your Web browser and enter the IP Address
of your D-Link device in the address bar. This should open the login page for the Web
management. Follow instructions to login and complete the configuration.
2) How can I setup my router to work with a Cable
modem connection?
This FAQ is for most satellite and cable connections (IE Adelphia, AT&T, CableOne,
Cablevision, Charter, Cogeco, Comcast, Cox, DTG, Insight, KingWood, Knowlogy,
MediaOne, Millenium, Optimum, RCN, RoadRunner, Rogers, and Shaw). These
instructions will also work for DSL users that do not use PPPoE (AllTel, BellSouth,
Coastal Utilities, Cyberonic, Empower, MSN, Qwest, Roseville, TC3Net, Telus, and
Verizon).
Note: Please configure the router with the computer that was last connected directly
to the cable modem.
Step 1: Log into the web based configuration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and
the password is blank (nothing).
D-Link Systems, Inc.
Dynamic Cable connection
Frequently Asked Questions
75