Table of Contents
Advertisement
Section - Configuration
Wireless Mode:
The current wireless mode is set to Access Point, it
will create a wireless infrastructure network.
Enable Wireless:
Check the box to enable the wireless function. If you
do not want to use wireless, uncheck the box to disable
all the wireless functions.
Wireless Network
When you are browsing for available wireless
Name:
networks, this is the name that will appear in the list
(unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, it is highly recommended to change from
the pre-configured network name.
802.11 Band:
Operating frequency band. Choose 2.4GHz for visibility
to legacy devices and for longer range. Choose 5GHz
for least interference.
802.11 Mode:
If you choose 2.4GHz band, than select one of the
following:
802.11b Only - Select if all of your wireless clients
are 802.11b.
802.11g Only - Select if all of your wireless clients
are 802.11g.
802.11n Only - Select only if all of your wireless clients
are 802.11n.
Mixed 802.11g and 802.11b - Select if you are using
both 802.11b and 802.11g wireless clients.
Mixed 802.11n and 802.11g - Select if you are using
both 802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
If you choose 5GHz band, then select either 802.11a only, 802.11n only, or Mixed 802.11n and 802.11a.
D-Link DAP-1555 User Manual
Manual Configuration
Wireless Settings
Advertisement
Table of Contents
