Installation; Before You Begin - D-Link DAP-1555 User Manual

Wireless n dualband mediabridge

Hide thumbs Also See for DAP-1555:

Table of Contents

Section - Installation

Installation

This section will walk you through the installation process. Placement of the DAP-1555 is very important. Do not place

the DAP-1555 in an enclosed area such as a closet, cabinet, or in the attic or garage.

Please configure the MediaBridge with the computer that was last connected directly to your modem. Also, you can

only use the Ethernet port on your modem. If you were using the USB connection before using the MediaBridge, then

you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the

MediaBridge, and then turn the modem back on. In some cases, you may need to call your ISP to change connection

types (USB to Ethernet).

If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as

WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

D-Link DAP-1555 User Manual

Table of Contents