Table of Contents
Advertisement
Section - Configuration
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
IP Address Mode:
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. Select DHCP to automatically assign
an IP address to the computers on the LAN/private
network.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
Device Name:
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
D-Link DAP-1555 User Manual
Network Settings
Static
5
Advertisement
Table of Contents
