Page 1 DI-707P D-Link Express EtherNetwork Broadband Router Manual Building Networks for People...
Page 2: Table Of Contents
Contents Package Contents ................3 Introduction....................4 Getting Started ..................10 Using the Configuration Menu.............. 11 Installing the Print Server Software ............43 Networking Basics ................47 Reset to Factory Default Settings ............75 Technical Specifications ..............76 Frequently Asked Questions ..............77 Contacting Technical Support ............105 Warranty ....................106 Registration ..................109...
Page 3: Package Contents
Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DI-707P will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.
Page 4: Introduction
Introduction The D-Link DI-707P Broadband Router includes 7 ports and a printer port. It provides a complete solution for Internet surfing and office resources sharing. It is an ideal way to extend the reach and number of computers connected to your network.
Page 5 All unwanted packets from outside intruders are blocked to protect your network. DHCP server supported All of the networked computers can retrieve TCP/IP settings automatically from the DI-707P. Web-based configuration Configurable through any networked computer’s web browser using Netscape or Internet Explorer.
Page 6: Introduction To Broadband Router Technology
User can define the attributes to support special applications requiring multiple connections, such as Internet gaming, video conferencing, Internet telephony and so on. The DI-707P can sense the application type and open a multi-port tunnel for it. DMZ Host supported Allows a networked computer to be fully exposed to the Internet;...
Page 7: Introduction To Local Area Networking
Introduction to Firewalls A firewall is a device that sits between your computer and the Internet that prevents unauthorized access to or from your network. A firewall can be a computer using firewall software or a special piece of hardware built specifically to act as a firewall. In most circumstances, a firewall is used to prevent unauthorized Internet users from accessing private networks or corporate LANs and Intranets.
Page 8: Introduction To Virtual Private Networking
Introduction to Virtual Private Networking Virtual Private Networking (VPN) uses a publicly wired network (the Internet) to securely connect two different networks as if they were the same network. For example, an em- ployee can access the corporate network from home using VPN, allowing the employee to access files and printers.
Page 9 LEDS stands for Light-Emitting Diode. The DI-707P has the following LEDs as described below: LED Activity A steady light indicates Power a connection to a power source. power source Flashes once per second to indicate an M1 LED active system.
Page 10: Getting Started
Ethernet Cardbus adapter (e.g., D-Link DFE-690TXD) into a laptop computer.(See the Quick Installation Guide included with the DFE-690TXD.) Connect your printer to the printer port on the DI-707P. Please refer to the quick installation guide for loading the print server software.
Page 11: Using The Configuration Menu
Type in the IP Address of the DI-707P http://192.168.0.1 Note: if you have changed the default IP Address assigned to the DI-707P, make sure to enter the correct IP Address. The factory default User name is admin and the default Password is blank (empty).
Page 12 Using the Configuration Menu Home > WAN Choose WAN Type WAN stands for Wide Area Network. In this case WAN represents the mode in which you connect to the Internet. If you are uncertain, please ask your ISP which of the following represents your connection mode to the Internet: Dynamic IP Address-...
Page 13 Using the Configuration Menu Home > WAN > Dynamic IP Address Most Cable modem users will select this option to obtain an IP Address automatically from their ISP (Internet Service Provider). Host Name- This is optional, but may be required by some ISPs. The host name is the device name of the Router.
Page 14 Using the Configuration Menu Home > WAN > Static IP Address If you use a Static IP Address, you will input information here that your ISP has provided to you. IP Address- Input the IP Address provided by your ISP. Input the Subnet Mask provided by your ISP.
Page 15 Using the Configuration Menu Home > WAN > PPPoE Most DSL users will select this option to obtain an IP address automatically from their ISP through the use of PPPoE. User Name- Your PPPoE username provided by your ISP Your PPPoE password is provided by your ISP Password- Service Name- (Optional) Check with your ISP for more information if they...
Page 16 Using the Configuration Menu Home > WAN > PPTP Point-to-Point Tunneling Protocol (PPTP) is a WAN connection used in Europe. My IP Address- Enter the IP Address. My Subnet Mask- Enter the Subnet Mask. Server IP Address- Enter the Server IP Address. PPTP Account- Enter the PPTP account name.
Page 17 Using the Configuration Menu Home > WAN > BigPond Cable Dynamic IP Address for BigPond is a WAN connection used in Australia. User Name- Enter in the username for the BigPond account. Enter the password for the BigPond account. Password- Login Server- (Optional) Enter the Login Server name if required.
Page 18 TCP/IP settings provided by the DI-707P. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
Page 19 Using the Configuration Menu Home > DHCP DHCP stands for Dynamic Host Control Protocol. The DI-707P has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.”...
Page 20 Using the Configuration Menu Advanced > Virtual Server The DI-707P can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
Page 21 Internet telephony. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-707P. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger field, then enter the public ports associated with the trigger port into the Incoming Ports field.
Page 22 Using the Configuration Menu Advanced > IP Filter Use IP (Internet Protocol) filters to allow or deny computers access to the Internet based on their IP address. Select this option if you do not want to use IP filters. Disabled IP Filter- Enabled or Disabled- Click Enabled to apply the filter policy or click Disabled to enter an inactive filter policy.
Page 23 At the bottom of the screen, there is a list of MAC addresses from the DHCP client computers connected to the DI-707P. To use them, select one from the drop down list and select an IP number you want to use. Then click the “Copy to” button and the DI-707P will fill in the appropriate information in the list.
Page 24 Using the Configuration Menu Advanced > URL Blocking Use URL Blocking to deny LAN computers from accessing specific web sites by its URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display.
Page 25 Domain filters apply to both wired computers connected to one of the four Ethernet LAN ports and to wireless clients connected wirelessly to the DI-707P. Disabled Domain Filter- Select this option if you do not want to use Domain filters.
Page 26 Using the Configuration Menu Advanced > Firewall Firewall Rules is an advance feature used to deny or allow traffic from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the device. Enabled or Disabled- Click Enabled to apply the filter policy or click Disabled to enter an inactive filter policy (You can reactivate the policy later).
Page 27 Using the Configuration Menu Advanced > Firewall Continued Protocol- Select one of the following protocols: TCP, UDP, or ICMP. Port Range- Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a single port that you want the policy applied to, then enter the port number in the Start Port field and leave the End Port field blank.
Page 28 SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DI-707P. The DI- 707P supports SNMP v1.
Page 29 DDNS (Dynamic Domain Name System) keeps dynamic IP addresses (e.g., IP ad- dresses assigned by a DHCP capable router or server) linked to a domain name. Users who have a Dynamic DNS account may use this feature on the DI-707P. DDNS- When an IP address is automatically assigned by a DHCP server, DDNS automatically updates the DNS server.
Page 30 Using the Configuration Menu Advanced > Routing Static routes can be added if you require specific routes within your internal network. These routes will not apply to the WAN (Internet) network. Destination- Enter in the IP of the specified network that you want to access using the static route.
Page 31 If you have a computer that cannot run Internet applications properly from behind the DI-707P, then you can allow that computer to have unrestricted Internet access. Enter the IP address of that computer as a DMZ (Demilitarized Zone) host with unrestricted Internet access.
Page 32 Internet IP Address of the computer that has access to the IP Address- DI-707P. If the IP Address is set to 0.0.0.0, this allows all Internet IP addresses to access the DI-707P. The port number used to access the DI-707P.
Page 33 Using the Configuration Menu Tools> Time Set the time here by entering it manually or by using NTP (Network Time Protocol.) NTP is a standard protocol on the Internet that sychronizes the time settings accurately for all the computers on your network. Select to enable NTP and synchronize the time settings on your Enable NTP- network using an NTP server.
Page 34 The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by the DI-707P can be uploaded to the unit. To reload a system settings file, click on Browse to search the local hard drive for the file to be used.
Page 35 Using the Configuration Menu Tools > Firmware You can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the firmware that you downloaded from the D-Link website to be used for the update.
Page 36 Using the Configuration Menu Tools > Misc...
Page 37 Click reboot to restart the unit. Block WAN Ping- Click Enable to block the WAN ping. Computers on the Internet will not get a reply back from the DI-707P when it is being “ping”ed. This may help to increase security. SPI Mode-...
Page 38 Using the Configuration Menu Status > Device Info This screen displays information about the DI-707P. Click to refresh IP addresses sent from the DHCP server. DHCP Renew- Click to release IP addreses sent from the DHCP server. DHCP Release-...
Page 39 Using the Configuration Menu Status > Log This screen displays activities occurring on the DI-707P. First Page- Click First Page to go to the first page of the log. Last Page- Click Last Page to go to the last page of the log.
Page 40 Using the Configuration Menu Status > Log Settings The DI-707P can be set up to send the log files to a specific E-Mail Alert- email address. SMTP Server IP- Enter in the IP address of the mail server. Enter in the email address of the recipient who will receive the Email Address- email log.
Page 41 Using the Configuration Menu Status > Stats In Stats section, traffic statistics are displayed. This will update the page. Refresh- This will reset the packet counter to zero. Reset- Displays Received / Transmitted packets from the WAN port. WAN- Displays Received / Transmitted packets from the LAN port. LAN-...
Page 42 Using the Configuration Menu Help This screen displays the complete Help menu. For help at anytime, click the Help tab in the Configuration menu.
Page 43: Installing The Print Server Software
Installing the Print Server Software Insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically. If it is not, please run “install.exe” on the CD-ROM. Click Install Print Server Software Select Operating System Click Next...
Page 44 Installing the Print Server Software (continued) Select the destination folder. Click Browse select a destination folder Click Next Click Finish Select the option for restarting the computer. Click After rebooting your computer, the software installation procedure is finished.
Page 45 DI-707P. For conve- nience, we call the printer connected to the printer port of the DI-707P a print server. On a Windows 95/98 platform, open the Printers window in the My Computer menu.
Page 46 2000/XP platform is similar to that of Win- dows 95/98 except for the printer Proper- ties screen: Click Configure Port Type in the IP address of the DI-707P. Click (Note: Screen shots are taken in Windows 2000, similar screens will appear in Windows XP.)
Page 47: Networking Basics
Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98.
Page 48 Networking Basics Please follow all the instructions in this window: Click Next. In the following window, select the description that best fits your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next.
Page 49 Networking Basics Enter a Computer description and a Computer name (optional). Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next.
Page 50 Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
Page 51 Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
Page 52 Networking Basics Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.
Page 53 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network.
Page 54 Networking Basics Naming your Computer To name your computer, please follow these directions. In Windows XP: Click Start (in the lower left corner of the screen). Right-click on My Computer. Select Properties and click. Select the Computer Name Tab in the System Properties window.
Page 55 Networking Basics Naming your Computer In this window, enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK. Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Ad- dresses to the computers on the network, using DHCP (Dynamic Host Configura- tion Protocol) technology.
Page 56 Networking Basics Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections. Right-click on Local Area Connections. Double-click on Properties.
Page 57 Windows XP/2000 Click on Internet Protocol (TCP/IP). Click Properties. Enter the LAN IP address of the Wireless Router. (D-Link wireless routers have a LAN IP address of 192.168.0.1.) The DNS server information will be supplied by your ISP (Internet Service Provider).
Page 58 Networking Basics Assigning a Static IP Address with Macintosh OSX Go to the Apple Menu and se- lect System Preferences. cClick on Network. Select Built-in Ethernet in the Show pull-down menu. Select Manually in the Con- figure pull-down menu. Input the Static IP Address, the Subnet Mask, and the Router IP Address in the ap- propriate fields.
Page 59 Networking Basics Selecting a Dynamic IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences. Click on Network. Select Built-in Ethernet in the Show pull-down menu. Select Using DHCP in the Configure pull-down menu. Click Apply Now. The IP Address, Subnet mask, and the Router’s IP Address will appear in a few...
Page 60: Adding A Local Printer
Networking Basics Adding and Sharing Printers in Windows XP After you have run the Network Setup Wizard on all the computers in your network (please see the Network Setup Wizard section at the beginning of Networking Basics), you can use the Add Printer Wizard to add or share a printer on your network. Whether you want to add a local printer (a printer connected directly to one computer), share an LPR printer (a printer connected to a print server) or share a network printer (a printer connected to your network through a Gateway/Router), use the Add Printer...
Page 61 Networking Basics Adding a local printer (a printer connected directly to a computer) A printer that is not shared on the network and is connected directly to one computer is called a local printer. If you do not need to share your printer on a network, follow these directions to add the printer to one computer.
Page 62 Networking Basics Adding a local printer Click Next. Select Local printer attached to this computer. (Deselect Automati- cally detect and install my Plug and Play printer if it has been selected.) Click Next. Select Use the follow- ing port: From the pull-down menu select the correct port for your printer.
Page 63 Networking Basics Adding a local printer Select and highlight the correct driver for your printer. Click Next. (If the correct driver is not displayed, insert the CD or floppy disk that came with your printer and click Have Disk.) At this screen, you can change the name of the printer (optional).
Page 64 Networking Basics Adding a local printer This screen gives you information about your printer. Click Finish. When the test page has printed, Click OK.
Page 65: Sharing A Network Printer
Networking Basics Adding a local printer Go to Start> Printers and Faxes. A successful installation will display the printer icon as shown at right. You have successfully added a local printer. Sharing a network printer After you have run the Network Setup Wizard on all the computers on your network, you can run the Add Printer Wizard on all the computers on your network.
Page 66 Networking Basics Sharing a network printer Click on Add a printer. Click Next. Select Network Printer. Click Next.
Page 67 Networking Basics Sharing a network printer Select Browse for a printer. Click Next. Select the printer you would like to share. Click Next. Click Finish.
Page 68 Networking Basics Sharing a network printer To check for proper installation: Go to Start > Printers and Faxes. The printer icon will appear at right, indicating proper installation. You have completed adding the printer. To share this printer on your network: Remember the printer name.
Page 69 To share an LPR printer (using a print server), you will need a Print Server such as the DI-707P. Please make sure that you have run the Network Setup Wizard on all the computers on your network. To share an LPR printer, please follow these direc- tions: Go to Start >...
Page 70 Networking Basics Sharing an LPR printer Select Create a new port. From the pull-down menu, select Standard TCP/IP Port, as shown. Click Next. Please read the instructions on this screen. Click Next. Enter the Printer IP Address and the Port Name, as shown.
Page 71 Networking Basics Sharing an LPR printer In this screen, select Custom. Click Settings. Enter the Port Name and the Printer Name IP Address. Select LPR. Enter a Queue Name (if your Print- Server/ Gateway has more than one port, you will need a Queue name).
Page 72 Networking Basics Sharing an LPR printer This screen will show you information about your printer. Click Finish. Select the printer you are adding from the list of Printers. Insert the printer driver disk that came with your printer. Click Have Disk. If the printer driver is already installed, do the following: Enter in the Printer Name.
Page 73 Networking Basics Sharing an LPR printer You can share this printer with other network users. It is optional. If you want to shre the printer, click Share name and enter a name for the printer. Click Next. You have the option of supply- ing a location and description of this printer.
Page 74 Networking Basics Sharing an LPR printer This screen will display information about your printer. Click Finish to complete the addition of the printer. Please run the Add Printer Wizard on all the computers on your network in order to share the printer. Note: You must run the Network Setup Wizard on all the computers on your network before you run the Add Printer Wizard.
Page 75: Reset To Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-707P to the factory default settings. To hard-reset the D-Link DI-707P to the Factory Default Settings, please do the following: Locate the Reset button on the back of the DI-707P.
Page 76: Technical Specifications
Technical Specifications Standards IEEE 802.3 10BASET-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3x Flow Control IEEE 802.1p Priority Queue ANSI/IEEE 802.3 NWay auto-negotiation VPN Pass Through Function PPTP L2TP IPSec Device Management Web-Based – Internet Explorer 6x or later; Netscape Navigator 6x or later;...
Page 77: Frequently Asked Questions
Frequently Asked Questions Why can´t I access the web based configuration? When entering the IP Address of the DI-707P (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built- in to a ROM chip in the device itself.
Page 78 Frequently Asked Questions (continued) Why can´t I access the web based configuration? (continued) What type of cable should I be using? (continued) What´s the difference between a crossover cable and a straight-through cable? The wiring in crossover and straight-through cables are different. The two types of cable have different purposes for different LAN configurations.
Page 79 Frequently Asked Questions (continued) Why can´t I access the web based configuration? (continued) Step 2 Disable any Internet security software running on the computer. Software firewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it.
Page 80 Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in Windows 95, 98, or Step 1 Click on Start, then click on Run.
Page 81 Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in Windows 2000/XP? Step 1 Click on Start and select Run.
Page 82 Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. Make sure you take note of your computer´s Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router.
Page 83 Frequently Asked Questions (continued) Why can´t I access the web based configuration? (continued) How can I assign a Static IP Address in Windows 2000? (continued) Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router.
Page 84 Step 5 Access the web management. Open your web browser and enter the IP Address of your D-Link device in the address bar. This should open the login page for the web management. Follow instructions to login and complete the configuration.
Page 85 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection? Dynamic Cable connection (IE AT&T-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast). Note: Please configure the router with the computer that was last connected directly to the cable modem.
Page 86: Static Cable Connection
Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection? (continued) Step 3 Power cycle the cable modem and router: Turn the cable modem off (first) . Turn the router off Leave them off for 2 minutes.** Turn the cable modem on (first).
Page 87 Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet. Step 1 Upgrade Firmware if needed. (Please visit the D-Link tech support website at: http://support.dlink.com for the latest firmware upgrade information.) Step 2 Take a paperclip and perform a hard reset.
Page 88 Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to your ISP, plug the power back into the D-Link router. Wait about 30 seconds and log back into the router.
Page 89 Step 1 Open your web browser and enter the IP Address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 2...
Page 90 DMZ hosts security, the Web pages might be corrupted but no other company information would be exposed. D-Link, a leading maker of routers, is one company that sells products designed for setting up...
Page 91 Frequently Asked Questions (continued) How do I configure the DMZ Host? (continued) Step 2 Log into the web based configuration of the router by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing) Step 3...
Page 92 Frequently Asked Questions (continued) How do I open a range of ports on my DI-707P using Firewall rules? Step 1 Access the router’s web configuration by entering the router’s IP Address in your web browser. The default IP Address is 192.168.0.1. Login using your password.
Page 93 192.168.0.7 How do I use PC Anywhere with my DI-707P router? You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1).
Page 94 Frequently Asked Questions (continued) How do I use PC Anywhere with my DI-707P router? (continued) Step 6 Create a second entry as shown here: pcanywhere2 Step 7 Click Apply and then click Continue. Step 8 Create a third and final entry as shown here:...
Page 95 Frequently Asked Questions (continued) How can I use eDonkey behind my D-Link Router? You must open ports on your router to allow incoming traffic while using eDonkey. eDonkey uses three ports (4 if using CLI): 4661 (TCP) To connect with a server 4662 (TCP) To connect with other clients 4665 (UDP) To communicate with servers other than the one you are connected to.
Page 96 Frequently Asked Questions (continued) How do I set up my router for SOCOM on my Playstation 2? To allow you to play SOCOM and hear audio, you must download the latest firmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation.
Page 97 Frequently Asked Questions (continued) How can I use Gamespy behind my D-Link router? Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1). Enter admin for the username and your password (blank by default). Step 2 Click on the Advanced tab and then click Virtual Server on the left side.
Page 98 Frequently Asked Questions (continued) How do I configure my router for KaZaA and Grokster? The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharing system. In most cases, you do not have to configure anything on the router or on the Kazaa software.
Page 99 You must open ports on your router to allow incoming traffic while hosting a game in Warcraft 3. To play a game, you do not have to configure your router. Warcraft 3 (Battlenet) uses port 6112. For the DI-707P: Step 1 Open your web browser and...
Page 100 Frequently Asked Questions (continued) How do I use NetMeeting with my D-Link Router? Unlike most TCP/IP applications, NetMeeting uses DYNAMIC PORTS instead of STATIC PORTS. That means that each NetMeeting connection is somewhat different than the last. For instance, the HTTP web site application uses port 80. NetMeeting can use any of over 60,000 different ports.
Page 101 Frequently Asked Questions (continued) How do I set up my router to use iChat? -for Macintosh users- (continued) Step 3 Create a new firewall rule: Click Enabled. Enter a name (ichat1). Click Allow. Next to Source, select WAN under interface. ichat1 In the first box, enter an *.
Page 102 Frequently Asked Questions (continued) How do I set up my router to use iChat? -for Macintosh users- For File Sharing: Step 1 Click on Advanced and then Virtual Server. Step 2 Check Enabled to activate entry. ichat3 Step 3 Enter a name for your virtual 6 5 0 0 6 5 0 0 server entry (ichat3).
Page 103 Frequently Asked Questions (continued) How do I send or receive a file via iChat when the Mac OSX firewall is active? -for Macintosh users- Mac OS X 10.2 and later The following information is from the online Macintosh AppleCare knowledge base: “iChat cannot send or receive a file when the Mac OS X firewall is active in its default state.
Page 104 Simply put, it is a method of connecting multiple computers to the Internet (or any other IP network) using one IP Address. D-Link´s broadband routers (ie: DI-707P) support NAT. With proper configuration, multiple users can access the Internet using a single account via the NAT device.
Page 105: Contacting Technical Support
Support echni cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.
Page 106: Warranty
D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part.
Page 107 D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product...
Page 108 D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior ©...
Page 109: Registration
Registration Register online your D-Link product at http://support.dlink.com/register/ (10/11/04)

D-Link Express EtherNetwork DI-707P Manual

Quick Links

Related Manuals for D-Link Express EtherNetwork DI-707P

Summary of Contents for D-Link Express EtherNetwork DI-707P

Table of Contents