Reset To Factory Default Settings - D-Link Express EtherNetwork DI-707P Manual

Resetting the DI-707P to the Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
choose to Reset the DI-707P to the factory default settings.
To hard-reset the D-Link DI-707P to the Factory Default Settings, please do
the following:
Locate the Reset button on the back of the DI-707P.
Use a paper clip to press the Reset button and
power on.
Hold for about 5 seconds (don't hold too long) and
then release. (Or, release when M1 and M2 flash
at the same time.)
After you have completed the above steps, the DI-707P
will be reset to the factory default settings.
75