D-Link Express EtherNetwork DI-707P Manual page 13

Using the Configuration Menu
Home > WAN > Dynamic IP Address
Most Cable modem users will select this option to obtain an IP Address automatically
from their ISP (Internet Service Provider).
Host Name-
MAC Address-
Clone
MAC Address-
Primary DNS
Address-
Secondary DNS
Address-
MTU-
Auto-reconnect -
This is optional, but may be required by some ISPs. The host
name is the device name of the Router.
The default MAC Address is set to the WAN's physical interface
MAC address on the Router.
This feature will copy the MAC address of the Ethernet card, and
replace the WAN MAC address of the Router with this Ethernet
card MAC address. It is not recommended that you change the
default MAC address unless required by your ISP.
Input the primary DNS address provided by your ISP
(Optional) Input the Secondary DNS address provided by your ISP.
Maximum Transmission Unit; default is 1500; you may need to
change the MTU to conform to your ISP.
If enabled, the Broadband Router will automatically connect to
your ISP after your system is restarted or if the connection is
dropped.
13