D-Link Express EtherNetwork DI-707P Manual page 28

D-link di-707p: user guide

Hide thumbs Also See for Express EtherNetwork DI-707P:

Table of Contents

Using the Configuration Menu

Advanced > SNMP

SNMP (Simple Network Management Protocol) is a widely used network monitoring and

control protocol that reports activity on each network device to the administrator of the

network. SNMP can be used to monitor traffic and statistics of the DI-707P. The DI-

707P supports SNMP v1.

Enable SNMP-

Local-

Remote-

Get Community-

Set Community-

(Simple Netwokkr Management Protocol)

LAN (Local Area Network)

WAN (Wide Area Network)

Enter the password public in this field to allow "Read only" ac-

cess to the network administration using SNMP. You can view

the network, but no configuration is possible with this setting.

Enter the password private in this field to gain "Read and Write"

access to the network using SNMP software. The administrator

can configure the network with this setting.

Table of Contents