Advertisement
Advertisement
Table of Contents
Related Manuals for Formax FD 3302
Summary of Contents for Formax FD 3302
- Page 1 FD 3302 Tabletop Air Suction Document Folder INSTALLATION MANUAL 7/2021...
-
Page 2: Installation Precautions
Installation Precautions 1. Installation Precautions 1-1. Before installation • Before installation, check that the power switch is turned off. • Check that the voltage and frequency of the area in which this machine is used match the specifications on the label pasted on the machine. • Do not drop the fold plates. Make sure the fold plates are not subject to shock. Otherwise, they may be damaged, resulting in poor folding accuracy. • The machine should be moved by two people, and carried by its bottom surface. •... - Page 3 Accessories 2. Accessories [u1] [u2] [u3] [u4] [u5] [m1] [m2] Name Qty. Upper fold plate Lower Fold plate Auxiliary paper outfeed guide Infeed paper tray extension Power cord [u1] Trail edge guide unit [u2] Side guide unit [u3] Plate unit [u4] Long paper guide [u5]...
- Page 4 Preparation 3. Preparation 3-1. Removing pressure release inserts The pressure release inserts have been installed in order to avoid the deformation of the folding rollers during shipping. Be sure to remove the pressure release inserts when installing. If the upper fold plate is set in place before removing the press release levers, the fold plate may become deformed or damaged.
- Page 5 3. Preparation Remove the second set of pressure release inserts by pushing inwards and pulling out. [D] Pressure release inserts Set aside these parts, keeping in mind they will not be used later in the installation process. Close the top cover opened in step 1. The removed the pressure release inserts will not be used later in the installation process.
-
Page 6: Installation Procedures
Installation Procedures 4. Installation Procedures 4-1. Attaching side air fan Remove the screws from the main cover. [A] Screws (qty 2) Attach the side air fan to the main body. Use the two screws removed in step 1 to attach the main cover. Align the hole in the fan base [C] with the hole in the main cover. [A] Screws (qty 2) [B] Side air fan [C] Hole in the fan base... - Page 7 4. Installation Procedures 4-2. Attaching the supplied parts Attach the upper fold plate along the set guides. [A] Upper fold plate [B] Set guides Push the fold plate into the notch of the set guide located on either side of the fold plate [A].
- Page 8 4. Installation Procedures Insert the lower fold plate along the set guides on the machine. [A] Lower fold plate ............1 [B] Set guides ..............2 Push the lower fold plate into the notch of the set guide located on either side of the fold plate.
- Page 9 4. Installation Procedures Open the outfeed tray. [F] Outfeed tray Attach the auxiliary paper outfeed guide as shown in the figure. [G] Auxiliary paper outfeed guide 4-3. Connecting power cord Connect the power cord to the machine. [A] Power cord Do not touch the power plug with wet hands.
-
Page 10: Setting Control Panel
Setting Control Panel 5. Setting Control Panel To set the language of the control panel, consult the Operator Manual. Checking Operations • When testing the machine, use the standard paper that will likely be used on the machine. • The folding position may vary slightly based on the thickness and stiffness of paper to be used, as well as environmental factors, such as humidity.
Need help?
Do you have a question about the FD 3302 and is the answer not in the manual?
Questions and answers