SoundPeats Capsule3 Pro User Manual

Capsule3 Pro User Guide
First use:
1. Please open the charging case, take out the two earbuds, and tear off the
insulating film on the earbuds charging contacts, then put the earbuds back into the
charging case and keep the lid open. Long press the button on the charging case for 3
seconds at the same time until the LED indicator on charging case
which indicates that the earbuds have entered pairing mode.
2. Turn on the bluetooth of your device, and please choose"
Pro
"in the list to pair, then the earbuds will connect with your device.
Control
Power on
Power Off
Play/Pause
Volume-
Volume+
Play Next
Answer/Hang up phone call
Reject phone call
Switch between two calls
Manually enter into pairing mode
Activate voice assistant
Enter/Exit Game Mode
Noise reduction/transparency/normal mode
switching
Reset
1. Put both earbuds into the charging case properly, and the indicator of the charging case
flashes twice.
Automatically: Open the charging case, the
earbuds will automatically power on
Manually: Long press the touch button for 1.5
seconds
Automatically: Place the earbuds back into the
charging case and close the lid.
Manually: Long press the touch button for 10
seconds
Double tap the touch button
Tap the left touch button once
Tap the right touch button once
Long Press the right touch button for 1.5
seconds
Double tap the touch button
Long press the touch button for 1.5 seconds
Long press the touch button for 2 seconds
Long press the button on the charging case for
3 seconds
Triple tap the right touch button
Triple tap the left touch button
Long press the left touch button for 1.5
seconds
blinking with white light,
SOUNDPEATS Capsule3