Checking The Fan Status; Checking The Power Supply Status; Additional Monitoring Commands; Using Leds To Visually Monitor The Chassis - Alcatel OS6400-48 Hardware User's Manual

Monitoring the Chassis

Checking the Fan Status

To check the current status for all six fans in the chassis, use the
-> show fan
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.

Checking the Power Supply Status

For information on checking power supplies for OmniSwitch 6400 Series switches, refer to

Additional Monitoring Commands

CLI Commands Used for Monitoring a Chassis
show cmm
show ni
show module
show module long
show module status

Using LEDs to Visually Monitor the Chassis

The front panel of OmniSwitch 6400 Series switches provides status LEDs that are useful in visually
monitoring the status of standalone switches, as well as switches stacked into a virtual chassis.
For detailed information on all OmniSwitch 6400 Series LEDs, refer to
page 4-4
Displays the basic hardware and status information for primary and
secondary management modules (if applicable).
Displays the basic hardware and status information for individual mod-
ules. If the switch is a standalone, information for the stand alone
switch displays.
Displays the basic information for individual modules. If the switch is a
standalone, information for the stand-alone switch displays.
Displays the detailed information for individual modules. If the switch
is a standalone, information for the standalone switch displays.
Displays the basic status information for individual modules. If the
switch is a standalone, information for the standalone switch displays.
OmniSwitch 6400 Series Hardware Users Guide
Booting OmniSwitch 6400 Series Switches
show fan command. For example:
page 2-20.
show power.
July 2010