3Com 3C886 - OfficeConnect 56K LAN Modem Router User Manual page 107

56k lan modem
Hide thumbs Also See for 3C886 - OfficeConnect 56K LAN Modem Router:
Table of Contents

Advertisement

analog signals
baud rate
bit rate
CHAP
central office (CO)
compression
DHCP
default
Domain
DNS
error control
firmware
FTP
G
LOSSARY
A variety of signals and wavelengths that can be transmitted over communications
lines. An example is a voice call over the phone line.
A term used to measure the speed of an analog transmission from one point to
another. Although not technically accurate, baud rate is commonly used
synonymously with bit rate.
Also referred to as transmission rate. The number of binary digits (or bits)
transmitted per second (bps). Communications channels using telephone channel
modems are established at set bit rates, commonly 28,800, 56,000, or higher.
Challenge Handshake Authentication Protocol. CHAP is one of two PPP
authentication protocols; PAP is the other. An authentication protocol requests
information to verify a valid user. CHAP is a stronger authentication method
because it uses encryption and may repeatedly request user verification at any
time after link establishment.
The facility at which individual telephone lines in a limited geographic area are
connected to the public telephone network.
Compression is a method of reducing the size of data packets without losing any
information. If you desire, the 56K modem can automatically compress data for
PPP calls to improve data transfer times using a compression method called hi/fn
LZS.
Dynamic Host Configuration Protocol. DHCP allows a server to automatically
assign an IP address to a newly-attached computer on an IP network.
Value set at the factory.
A domain is a unique name which refers to a single device on the Internet and is
used for organizational purposes.
Domain Name Server. DNS translates the common alphabetic name into the
numeric IP address. For example, Oscar's_PC is translated to 192.168.1.2.
Various techniques that check the reliability of characters or blocks of data.
Firmware is the code which resides in your 56K LAN Modem and controls its
behavior. It differs from software in the form of programs that run on your
computer.
File Transfer Protocol. The protocol invoked when uploading or downloading files
from a remote site via TCP/IP.

Advertisement

Table of Contents
loading

Table of Contents