TABLE OF CONTENTS INTRODUCTION General Description Indications for Use Measurement Principle Safety Information Display and Symbols Name of Each Part Contents/Product Includes BEFORE YOU START The Choice of Power Supply Installing and Replacing the Batteries MEASUREMENT Applying the cu Taking a Measurement INFORMATION FOR USER Tips for measurement Maintenances...
INTRODUCTION INTRODUCTION General Description Safety Information Thank you for choosing this arm type Blood Pressure Monitor (LS802-Ga). The symbols below might be in the user manual, labeling or other component. They are the It is equipped with the following key features. Please read this manual to know how to use your requirement of standard and using.
Page 5
INTRODUCTION INTRODUCTION Warning Precaution * DO NOT self-diagnose the measurement results and start treatment by yourself. The measu- * Blood Pressure Monitor is intended to be operated by adults, including medical staffs and lay persons. Adult patients could also be intended users or operators. rement results given by this device is not a diagnosis.
INTRODUCTION INTRODUCTION Display and Symbols SYMBOL EXPLANATION Systolic blood pressure reading Diastolic blood pressure reading Excessive body motion detector symbol Appears when talking, moving, or shaking of the arm with the cuff on is detected during a measurement. NOTE: The measured blood pressure reading may not be accurate when this symbol is displayed with the reading.
INTRODUCTION BEFORE YOU START Name of Each Part The Choice of Power Supply 1. DC 6V, 4 AA size batteries 2. AC adapter, 6V CUFF Please use the AC adapter authorized by the manufacturer! (Optional!) Please unplug the adapter to depart from the using AC adapter AIR CONNECTOR utility power, when you finish the measurement.
BEFORE YOU START MEASUREMENT Applying the cuff Note : Only use a cu that has been approved by the manufacturer for this device model. When you insert or replace batteries into the device, the symbol will displays on the Before use, please con rm if it ts your arm circumference. LCD alternately.
MEASUREMENT MEASUREMENT Taking a Measurement 2. After the measurement, the data transmission starts. The symbol will blink on the LCD. 1. When the monitor is o , press the button to turn on, and then it will complete the whole measurement automatically. LCD display Adjust the zero point If successful, the symbol...
INFORMATION FOR USER INFORMATION FOR USER Tips for Measurement Maintenance Measurements may be inaccurate if taken in the following circumstances. In order to get the best performance, please follow the instructions below. 1. Cleaning Process: Step 1: Before cleaning the monitor, make sure that the monitor is switched off and disconnected from the power line.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? CAUTION Only a physician can tell your normal BP range. Please contact a physician if your When ventricles contract and pump blood out of the heart, the blood pressure reaches its measuring result falls out of the range.
ABOUT BLOOD PRESSURE TROUBLE SHOOTING Why does my blood pressure fluctuate throughout PROBLEM DISPLAY CHECK THIS REMEDY the day? Batteries are exhausted. Replace with new batteries. No power Display will 1. Individual blood pressure varies multiple times everyday. It is also a ected by the way you tie Batteries are inserted Insert the batteries not light up...
For more information about our products, please visit www.transtekcorp.com. Degree of protection Type BF applied part Manufactured by: Guangdong Transtek Medical Electronics Co., Ltd. Company: Guangdong Transtek Medical Electronics Co., Ltd. Battery Powered Mode: Device Classification Internally Powered ME Equipment Address: Zone A, No.105, Dongli Road, Torch Development District,...
EMC GUIDANCE EMC GUIDANCE The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments. Technical description: 1. All necessary instructions for maintaining BASIC SAFETY and ESSENTIAL PERFOR- Essential performance: MANCE with regard to electromagnetic disturbances for the expected lifetime. Accuracy of measuring blood pressure and pulse rate 2.
Page 15
EMC GUIDANCE EMC GUIDANCE Table 2 Table 3 Guidance and manufacturer’s declaration – electromagnetic Immunity Guidance and manufacturer’s declaration - electromagnetic Immunity IEC 60601-1-2 Radiated RF Test Maximum Compliance Immunity Test Compliance level Band Distance 60601-1-2 Test level IEC61000-4-3 Frequency Service Modulation Power...
FCC STATEMENT SPECIFICATIONS FOR 4G FCC ID: OU9LS802GAM2 Specifications for 4G This device complies with Part 15 of the FCC Rules. Operation is subject to the following Supporting Cat-M1: two conditions: (1) this device may not cause harmful interference, and (2) this device must band:...
Need help?
Do you have a question about the TeleCuff Gen 1 and is the answer not in the manual?
Questions and answers