Table of Contents
Advertisement
Quick Links
Contains FCC ID: OU9AW8001-LS
GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD
Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch
Development District, Zhongshan, Guangdong, 528437, China
User Manual
Blood Pressure Monitor
Thank you very much for selecting TRANSTEK Blood Pressure Monitor
LS808-B.
Please do read the user manual carefully and thoroughly so as to ensure
the safe usage of this product, and keep the manual well for your further
reference in case you have problems.
Version:1.0
LS808-B
Arm Type
Advertisement
Table of Contents
Related Manuals for TRANSTEK LS808-B
Summary of Contents for TRANSTEK LS808-B
- Page 1 Blood Pressure Monitor LS808-B Arm Type Contains FCC ID: OU9AW8001-LS Thank you very much for selecting TRANSTEK Blood Pressure Monitor LS808-B. GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO., LTD Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch Please do read the user manual carefully and thoroughly so as to ensure...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Table of Contents INTRODUCTION ............. 2 General Description Indications for Use Measurement Principle Safety Information LCD Display Signal Monitor Components BEFORE YOU START ............7 Power Supply and Charge Power Setting the Time,Date and Unit Pair up with Your Device Tie the Cuff MEASUREMENT ............. -
Page 3: Introduction
Symbol for “TYPE BF APPLIED Indications for Use GUIDE MUST BE READ” PARTS” 1.The Transtek Blood Pressure Monitor is digital monitors intended for use in Symbol for “ENVIRONMENT Symbol for “MANUFACTURE PROTECTION - Wast electrical products measuring blood pressure and hearbeat rate with arm circumference ranging DATE”... -
Page 4: Lcd Display Signal
INTRODUCTION INTRODUCTION LCD Display Signal CAUTION This device is intended for adult use only. This device is intended for no-invasive measuring and monitoring of arterial blood pressure. It is not intended for use on extremities other than the arm or for functions other than obtaining a blood pressure measurement. -
Page 5: Monitor Components
3 Pump (Type BF applied part) 4 Valve 1. The battery of LS808-B is built-in rechargeable li-polymer battery, 5 Cuff please do not disassemble it by the unauthorized maintenance personel. 2. Under the normal using, it can charge power about 300 times,... -
Page 6: Setting The Time,Date And Unit
BEFORE YOU START BEFORE YOU START Setting the Time,Date and Unit To ensure the stored measurement result has correct time (3) Press “User 1” button again to confirm [HOUR]. Then the numeral record, please set time and unit before device is used. representing [MINUTE] blinks. - Page 7 BEFORE YOU START BEFORE YOU START (5) Repeat step 2 and 3 to confirm[MONTH], [DAY] and [YEAR]. (7) After confirming the measurement unit, the LCD will display “dOnE” and the monitor will shut off. (6) Repeat step 2 and 3 to confirm the measurement unit.
-
Page 8: Tie The Cuff
Interference may occur in the vicinity of equipment marked with the following symbol For a meaningful comparison, try to measure under similar conditions. For . And LS808-B may interfering vicinity electrical equipment. example, take daily measurements at approximately the same time, on the same Keep the monitor at least 20 centimeters away from the human body (especially the arm, or as directed by a physician. - Page 9 B. Maximum 60 records are both for user 1 and user 2. CAUTION 1.With LS808-B successfully pair-up with your iPhone, the measurement data will be automatically transmitted to your mobile via Bluetooth.
-
Page 10: Measurement
DATA MANAGEMENT DATA MANAGEMENT (4) When in the memory mode, press the User 1 button Recall the Records to recall the measurement history of User 1, or press the User 2 button to recall the measurement history. (1) When the monitor is off, press “Query” button to access the memory. -
Page 11: Delete The Records
DATA MANAGEMENT DATA MANAGEMENT (3) The LCD will display “dEL dOnE” and then shut off. Delete the Records (1) When under the query mode, press and hold “Query” button for 3 seconds to clear the memory. (2) When the LCD display “dEL ALL”, press “Query” (4) If you wish to stop clearing the memory, you may button to confirm. -
Page 12: Information For User
If you have any problems with this device, such as setting up, maintaining or using, please contact with SERVICE PERSONNEL of Transtek. Don’t open or repair the device by yourself. Please report to Transtek if any unexpected operation or events occur. -
Page 13: About Blood Pressure
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? Why does my blood pressure fluctuate throughout the day? When ventricles contract and pump blood out Systolic Diastolic of the heart, the blood pressure reaches its blood entering blood discharging 1. -
Page 14: Troubleshooting
TROUBLESHOOTING SPECIFICATIONS This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it 3.7V 1000mAH Built-in rechargeable li-polymer Power supply should, check here before arranging for servicing. -
Page 15: Athorized Component
Clinical investigation Part 2 : Clinical validation of automated measurement type For more information about our products, please visit www.transtek.cn.you can get customer service, usual problems and customer download, transtek Software life-cycle IEC/EN 62304:2006+AC: 2008 Medical device software will serve you anytime. -
Page 16: Fcc Statement
FCC STATEMENT EMC GUIDANCE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject EMC Guidance to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the LS808-B and is the answer not in the manual?
Questions and answers