Hardware Installation - TRENDnet TEG-2248WS Quick Installation Manual

52-port 10/100/1000mbps gigabit web smart switch

Hide thumbs Also See for TEG-2248WS:

2. Hardware Installation

Note:

1. After hardware installation is complete, use the Web Browser to configure

the TEG-2248WS. Open your web browser, and enter the default IP

Address http://192.168.0.1 and default password "admin". Make sure your

computer and the TEG-2248WS are configured to the same network

segment.

2. The Mini-GBIC slots are shared with Port 49 and 50 Gigabit Ethernet ports.

When the Mini-GBIC slots are in use, port 49 and 50 Gigabit Ethernet ports

are disabled.

1. Connect the Power Cord to the

rear of the TEG-2248WS and then

to a power outlet.

2. Connect a CAT-5, CAT-5e or CAT-6

RJ-45 network cable from the

computer to an available Ethernet

port of the TEG-2248WS.

English

Table of Contents