3. Web Smart Switch Management Utility
Note: If you would like to easily discover all the Web Smart Switches on the
network, assign IP Address, change the password, and upgrade to new
firmware, then install the Web Smart Switch Management Utility. Follow the
steps below.
For Windows User
1. Insert the Utility & User's Guide
CD-ROM into your computer's
CD-ROM Drive and then click
Install Utility.
2. Follow the Installation Wizard
instructions. Click OK.
3. Click Start > Programs >
TRENDnet > Web Smart Switch
Management Utility, and then
click Web Smart Switch
Management Utility.
3
English