Happy Beds Enzo 3 Drawer Storage Bed Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Happy Beds Manuals
  4. Indoor Furnishing
  5. Enzo 3 Drawer Storage Bed
  6. Assembly instructions manual

Happy Beds Enzo 3 Drawer Storage Bed Assembly Instructions Manual

3ft single
Hide thumbs

Advertisement

Table of Contents

Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.
Enzo 3 Drawer Storage Bed -
3FT Single
Assembly Instructions
.
www.happybeds.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Enzo 3 Drawer Storage Bed and is the answer not in the manual?

Questions and answers

Related Manuals for Happy Beds Enzo 3 Drawer Storage Bed

Summary of Contents for Happy Beds Enzo 3 Drawer Storage Bed

  • Page 1 Enzo 3 Drawer Storage Bed - 3FT Single Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
  • Page 2 These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
  • Page 3 ENZO 3 DRAWERS STORAGE BED ASSEMBLY INSTRUCTION 1200mm 560MM A: L1020 x D235 x H195mm Assembled drawer internal dimensions. Drawer side of this bed is interchangeable. Option1: Left Handside Option2: Right Handside 140mm 530mm 335mm All measurements are approximate PAGE 1 OF 29...
  • Page 4 Hardware Round Sticker 19PCS M8 x 30mm Cam Stud 74PCS 71PCS 71PCS M4 Allen key Unitar Jcbc Screw CSK SCREW M6 x 55mm M4 X 38MM 12PCS 12PCS CSK SCREW FELT PAD JCBC W SCREW M3.5 X 16MM 6PCS M6 X 30MM 23PCS 30PCS PAGE 3 OF 29...
  • Page 5 Parts ALL PARTS ARE NUMBERED ACCORDINGLY CARTON 1 OF 3 CARTON 2 OF 3 NO PART NAME NO PART NAME 13 LEFT HAND SIDE RAIL HEADBOARD TOP PANEL 14 CENTER SUPPORT HEADBPARD LEFT PANEL 15 RIGHT HAND SIDE RAIL HEADBOARD RIGHT PANEL 20 RIGHT DRAWER SIDE PANEL LOWER SHELF PANEL 21 LEFT DRAWER SIDE PANEL...
  • Page 6 Step 1 12 PCS 10 PCS 14 PCS DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. DO NOT USE POWER TOOLS PAGE 5 OF 29...
  • Page 7 Step 2 11 PCS 8 PCS 10 PCS DO NOT USE POWER TOOLS DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. PAGE 6 OF 29...
  • Page 8 Step 3 5 PCS 6 PCS 13 PCS DO NOT USE POWER TOOLS DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. PAGE 7 OF 29...
  • Page 9 Step 4 9 PCS Back View Back View DO NOT USE POWER TOOLS DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. PAGE 8 OF 29...
  • Page 10 Step 5 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 1 PC PAGE 9 OF 29...
  • Page 11 Step 6 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 1 PC PAGE 10 OF 29...

  • Page 12: Front View

    Step 7 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 1 PC FRONT VIEW PAGE 11 OF 29...

  • Page 13: Top View

    Step 8 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 2 PCS 1 PC 2 PCS TOP VIEW DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. DO NOT USE POWER TOOLS PAGE 12 OF 29...
  • Page 14 Step 9 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 2 PCS 23 PCS 4 PCS BACK VIEW Front view DO NOT USE POWER TOOLS DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. PAGE 13 OF 29...
  • Page 15 Step 10 4 PCS 12 PCS 18 PCS Back View Front View DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. DO NOT USE POWER TOOLS PAGE 14 OF 29...
  • Page 16 Step 11 8 PCS 6 PCS X 2PCS Front View X 2PCS Back View PAGE 15 OF 29...
  • Page 17 Step 12 10 PCS 8 PCS PAGE 16 OF 29...
  • Page 18 Step 13 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 1 PC X 10 PAGE 17 OF 29...

  • Page 19: Option1: Left Handside

    Step 14 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 6 PCS 1 PC BACK VIEW BACK VIEW Option1: Left Handside PAGE 18 OF 29...
  • Page 20 Step 14.1 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 6 PCS 1 PC Option1: Left Handside PAGE 19 OF 29...

  • Page 21: Option2: Right Handside

    Step 14.2 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 6 PCS 1 PC BACK VIEW BACK VIEW Option2: Right Handside PAGE 20 OF 29...
  • Page 22 Step 14.3 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 6 PCS 1 PC Option2: Right Handside PAGE 21 OF 29...
  • Page 23 Step 15 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 19 PCS PAGE 22 OF 29...
  • Page 24 Step 16 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 30 PCS 1 PC X 30 PAGE 23 OF 29...
  • Page 25 Step 17 12 PCS 24 PCS 12 PCS DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. DO NOT USE POWER TOOLS PAGE 24 OF 29...
  • Page 26 Step 18 12 PCS Step 19 DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. DO NOT USE POWER TOOLS PAGE 25 OF 29...
  • Page 27 Step 20 WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING BOLT TURN CLOCKWISE UNTIL SECURE CORRECT WRONG 1 PC Step 21 DO NOT USE POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM. DO NOT USE POWER TOOLS PAGE 26 OF 29...
  • Page 28 Step 22 Drawer Assembly Completed Step 23 PAGE 27 OF 29...
  • Page 29 Step 24 ENZO THREE DRAWERS STORAGE BED PAGE 28 OF 29...

  • Page 30: General Care And Maintenance

    Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & fixings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the floor as this will cause damage to the joints.

Table of Contents