Line In Use (3-5); Next Call (3-6); Voice (3-6-1); Data (3-6-2) - Motorola T205 User Manual

Line in Use (3-5)

This function allows you to use two different telephone numbers for one single
phone. You can designate the number used to make a call and use both of
these numbers simultaneously to receive calls without having to use two
phones to do so. This function is only available if your network service provider
provides such service.
After you enter this item, you can press
or Line 2), then press key to confirm. The number you selected (Line 1
or Line 2 ) will appear on the screen while in standby mode.

Next Call (3-6)

Your phone can receive voice, data and fax calls. Depending on your network
service provider, you may have to select among the voice, data and fax calls
under this option before you can receive them correctly. This scenario only
applies to one number scheme network service providers (i.e., the voice, data
and fax calls are all transmitted via a single telephone number).
Consult your network service provider to decide if you need to do such setting.

Voice (3-6-1)

Press key to set the next call as a voice call (This is the default
setting).

Data (3-6-2)

Press key to set the next call as a data call.

Fax (3-6-3)

Press key to set the next call as a fax call.
After you receive a data or fax call, you need to change the setting back to
"voice" in order to receive ordinary voice calls.
key to choose the number (Line 1
37