Chapter 1: Basic Operation; Turn On The Phone Power; Turn Off The Phone Power; Make A Call - Motorola T205 User Manual

Chapter 1: Basic Operation

1

.1 Turn On the Phone Power

Long press key to turn on the phone power.
1

.2 Turn Off the Phone Power

Long press key to turn off the phone power.
1

.3 Make a Call

Long press key to switch your phone on.
1.
Enter your PIN and press
2.
After the PIN is accepted, your phone will start searching for the
3.
designated network automatically.
After connecting to the network successfully, the phone will beep twice
4.
and the LCD display will show the network you connect to and go into
standby mode.
In this standby mode, dial the phone number including the area code.
5.
Then, press key to send out your call.
When the network service is not available, no signal level will
be displayed on the screen.
When connected to the network other than your designated
one, the signal strength will still be displayed on the screen.
However, you can only make an emergency call.
During a call, you can use the call functions described on
page 17.
1

.4 End a Call

Press key to end or cancel a call.
1

.5 Answer a Call

When the phone rings or vibrates, the screen will display the name or the
number of the caller (If your network service provider supports such function
and you have subscribed to it). The name displayed depends on the data in the
Phone Book. Press key to answer a call. There are three answering mode
options for you to answer your calls. Please refer to page 38 for details.
key.
13