Table of Contents
Advertisement
Over time, as the batteries wear out, the charge capacity will
reduce, so reducing the talk/standby time of the handset.
Eventually the batteries will need to be replaced.
Setting the date and time
The phone uses the 12 or 24 hour clock.
In standby mode:
1. Press
.
2. Press
or
to select "HS SETTINGS" and press
3. Press
or
to select "DATE & TIME" and press
4. Press
or
to select "DATE FORMAT" and press
5. Press
or
to select "MM - DD" or "DD - MM" and press
6. Press
or
until "TIME FORMAT" is displayed and press
.
7. Press
or
to select "24 - HOUR" or "12 - HOUR" and press
.
8. Press
or
until "SET TIME" is displayed and press
9. Enter Hour and Minute using the keypad, and press
Connecting the telephone line cord
Connect the telephone line cord into the TEL LINE socket on
the back of the base. Connect the telephone line cord adapter
to the other end and plug into the telephone wall socket.
Only use the telephone line cord supplied or your phone may
not work correctly.
Setup is now complete. You can make and receive calls on
your phone.
4
2. Your Handset
Controls & Functions
Handset
Earpiece/Receiver
.
.
.
Display
.
Cancel
Phonebook
.
.
Redial/Flash
Temporary Tone
Speaker (back)
Up/down
Menu/OK
Hook
Speaker/Pause
Intercom
#/Lock
Microphone
Advertisement
Table of Contents
