Displaying Camera Images On A Tv Screen - Casio Exilim EX-Z70 User Manual

PLAYBACK
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Toggle monitor screen
indicators on and off
Cancel playback
IMPORTANT!
• Audio volume can be adjusted only when playback is
being performed or is paused.
• If your recording has index marks (page 110) inside
it, you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [ ] or [ ]. Next, press [SET] to
resume playback from the index mark position.
Do this:
Hold down [ ] or [ ].
Press [SET].
Press [ ] and then use [ ]
and [ ].
Press [ ] (DISP).
Press [MENU].

Displaying Camera Images on a TV Screen

You can display recorded images on a TV screen. To
display camera images on a TV, you need a television
equipped with a video input terminal, USB cradle, and the
AV cable that comes with the camera.
1.
Connect one end of the AV cable that comes
with the camera to the [AV OUT] port of the
USB cradle, and the other end to the video
input terminal of the TV.
• Connect the yellow plug of the AV cable to the video
input (yellow) terminal of the TV, and the white plug
to the TV's audio input (white) terminal.
AV cable
TV
Video input terminal
151
[AV OUT] (AV output port)