Displaying Camera Images On A Tv Screen - Casio Exilim EX-Z6 User Manual

PLAYBACK
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Toggle monitor screen
indicators on and off
Cancel playback
IMPORTANT!
• Audio volume can be adjusted only when playback is
being performed or is paused.
• If your recording has index marks (page 108) inside
it, you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [ ] or [ ]. Next, press [SET] to
resume playback from the index mark position (page
108).
Do this:
Hold down [ ] or [ ].
Press [SET].
Press [ ] and then use [ ]
and [ ].
Press [ ] (DISP).
Press [MENU].

Displaying Camera Images on a TV Screen

You can display recorded images on a TV screen and even
use a TV screen to compose images before you record
them. To display camera images on a TV, you need a
television equipped with a video input terminal.
1.
Connect one end of the AV cable that comes
with the camera to the camera's USB/AV
connector, and the other end to the video
input terminal of the TV.
Yellow White
(Video) (Audio)
TV
Make sure that the side of the connector that is marked
with an arrow ( ) is facing in the same direction as the
front (lens side) of the camera.
148
AV cable
Video input
terminal
USB/AV connector