Canon Powershot Pro70 Hardware Manual page 12

• Do not handle the power adapter cord if your hands are wet. Handling it with wet hands may
lead to electrical shock. When unplugging the cord, ensure that you hold the rigid portion of
the plug. Pulling on the flexible portion of the cord may damage or expose the wire and
insulation, creating the potential for fires or electrical shocks.
• Use of power sources not expressly recommended for this equipment may lead to overheating,
distortion of the equipment, fire, electrical shock or other hazards. Use only the recommended
compact power adapter and accessories.
• Power down the computer and unplug the power adapter cord before attempting to connect
the interface cable to avoid the risk of electrical shock.
• Do not place the battery pack near a heat source or expose it to direct flame or heat. Neither
should you immerse it in water. Such exposure may damage the battery pack and lead to the
leakage of corrosive liquids, fire, electrical shock, explosion and serious injury.
• Do not attempt to disassemble, alter or apply heat to the battery pack. There is serious risk of
injury due to an explosion. Immediately flush with water any area of the body, including the
eyes and mouth, or clothing that comes into contact with the inner contents of a battery pack.
If the eyes or mouth contacts these substances, immediately flush with water and seek medical
assistance.
• Avoid dropping or subjecting the battery to severe impacts that could damage the casing. It
could lead to leakage and injury.
• Do not short-circuit the battery terminals with metallic objects, such as key holders. It could
lead to overheating, burns and other injuries. Use the supplied battery case when transporting
or storing the battery pack.
10