Table of Contents
Advertisement
2. Fit the snap at the
bottom of the case
to the correspond-
ing fittings on the
case holder.
3. Fit the snaps on
the back of the
case to the fittings
on the back of the
case holder.
If you use the shoulder strap, pull it free of
the case as shown below.
Hard Strap HS-PS200
This strap is useful to prevent the camera from
being accidentally dropped when operated
with one hand. Follow the procedures below
to install it.
1. If a shoulder strap
is installed on the
camera, tempo-
rarily detach the
strap from the
strap holder by the
display panel. In
addition, remove the buckle and strap
guide from the hard strap.
101
Hide quick links:
Advertisement
Table of Contents
