Switching Between Cf Cards; Installing The Strap - Canon Powershot Pro70 Hardware Manual

Switching between CF Cards

If two CF cards are installed, use the CF
button to select between them.
1. Set the mode dial to auto, program or
play.
2. Press the CF button to display the
number of the CF card slot containing
the card you wish to use in the display
panel.
CF
1

Installing the Strap

A shoulder strap is supplied with this camera.
Follow the procedures below to install the
strap.
1. Insert the end of the strap down
through the strap holder.
2. Thread the end of the strap through
the buckle as shown.
3. Adjust the strap to a comfortable
length by pulling it through the buckle.
4. Tighten the strap above and below the
2
buckle so that it will not loosen
accidentally.
37