Setting The Date/Time - Canon Powershot Pro70 Hardware Manual

4. Remove the button battery.
Shift it in the direction shown to allow its
removal.
5. Install the new button battery with the
positive terminal (+) facing outward.
6. Close the cover and tighten the screw
moderately.

Setting the Date/Time

After the button battery has been replaced,
follow the procedures below to reset the date
and time settings.
1. Set the mode dial to play, auto or
program.
2. Press the menu button.
The menu will display on the LCD monitor.
MENU
Menu Button
3. Press the + or - button to advance the
selection to [Setup]. Press the set button.
31